DJ TV Display - Part 3

Completed the second side, that is the right side in 1/3 the time it took to do the first side - the left side.

Ready for the next stage of the build each side will have four large holes.

DJ TV Display - Part 2

After a good start with Philip Tyme on Saturday I am back on this job cos for the last two days got dragged away doing other stuff.

Doing some planning before we start. This Torx wood screw is just the right length and I have a dog food tin full of them. 

DJ TV Display - Part 1

Doing a job for Philip Tyme to make a integrated display TV unit for DJ gigs.

For the Bunnings plywood we both had to ring around, see the picture further down the page.

Nothing out his way and in my side the only one was Notting Hill so off yesterday morning in the Camry to buy 3 x 1200 x 600 x 18mm @ $35 per sheet. Loaded nicely across the back seat. We are using this picture that Philip found on the net.

MSCD Reception Sign - Part 3

While the morning sun is about masked off the internal frame tray and spray painted matt white.

As usual used the spray paint carousel. Thisis early afternoon and that won't take long to dry so I'll soon be able to continue the job. 

MSCD Reception Sign - Part 2

With some concepts in mind started making the internal frame.

Doing a fitting before glue-up. The backboard here is the actual picture frame back flipped over. When dry it's removed along the 'masking' sticky tape so the frames don't stick together cos of excess glue, then turned over ready for the next stage.

MSCD Reception Sign - Part 1

This is another job for the Melbourne School Of Classical Dance.

Printed the logo image on glossy photo paper.

Ballerina wall feature - Part 9

This should be the last session and we are going to glue the ballerina onto the backboard.

This part is always tricky we don't want drops of glue dripping on the backboard in the wrong places so we are going to cut that poster paper to sit in the frame.