Stakes and screws to secure the fence paling boards.
Prepping to secure the board joins with stakes.
That trial hardwood stake that I made will do the job.
Went and cut some more on the homemade 14" bandsaw.
First one done.
Clamping the first join but this locking C-clamp does not have enough reach.
Off to get a long reach one.
That's better; I need to have room at the top to drill pilots through the metal edging for two screws.
First join is done and happy with that.
Second one done... move along.
then the end of the last board.
Dig out to make room for the nose of the clamp.
Back soon...
No comments:
Post a Comment