In this session we re fitting the reversing camera onto the number plate.
Drill a 'corner' pilot hole.
Yeah... out of focus.
Cataracts are getting worse I need to see my GP for referral to ophthalmologist.
The hole is going to end up over 1/2" so off to get my larger drill set.
That will still need some work with a large round file.
Camera from China... rego plate from Australia and the holes don't line up.
Mark and drill holes.
With that done we can go back to the car.
Nearly there...
With the camera fitted we cam move onto the wiring.
We need to splice camera power wires onto the reversing lamp wires.
With everything floating in the air that's going to be a fiddly job.
Back soon for Part 3.
No comments:
Post a Comment