Camry reversing/rear cameras - Part 1

Yesterday we repaired the Mitsubishi Lancer Rear View Camera Mirror.

Today we are working on my 1991 Toyota Camry installing a number plate reversing camera and a rear parcel shelf camera. 

This is going to take 2 or 3 sessions over a couple of days!

Remove the rego plate.

We will have to drill a hole and with that bit of info stored in the err... brain we won't return here untill much later in the job.

Remove the rear seats.

That's the reversing camera video cable.

Removed the rear drivers door sill trim, the drivers sill trim and the drivers right footwell kick panel.

Using a thin strip of wood to feed the cable through.

Keep going...

Now I have to maneuver myself into the footwell - ouch.

Ran the cable through and replaced the kick panel. Need to rest the whole body now for a few minutes.

That is the cable for the dashcam.

Now we can backtrack and start replacing the sill trims.

With that done do the same for the drivers passenger sill trim.

Putting the seats back requires a lot of physical effort.

With the cabling done that ends the first session.

Back soon...