Kodak Negative Scanner - Part 6

 Another day and back again to have another go at cutting another piece of Acrylic.

Yay... a nice clean, clear and unmarked piece of 'Acrylic glass' that will sit on top of the negative to stop it curling. This time I trimmed off two edges of the sheet to get away from where air and moisture had penetrated the edges drying out the adhesive backing. Same again hair dryer and where needed Tree Tree Oil. This time for the final clean I used a microfibre cloth!

Tack the box back together - again.

Finally setting up to do a test.

Height is OK but too much width.

UPDATE: This turned out to be a quirk in the Kodak app.

Tweaked the Zoom... keep fiddling

Cropped at 9:16... happy with that.

Back soon...