Setting up for planing the edges of fence paling boards.
I have relocated the dust extractor from the top of the table (thicknesser mode) to underneath the table.
This shows how the dust extractor tucks in under the table.
Off outside to empty the shop vac and brush off the filter.
Replacing my DIY fence that evens blade wear across the table when planing timber material.
The DIY fence is held in place...
with two blocks that look like this.
Depth adjustment knob and on the right the depth indicator.
The boards are simply pushed through with moderate pressure against the fence and down onto the table.
No comments:
Post a Comment