Monday, February 2, 2015

Bandsaw 38 - Full view photo

It turned out to be quite a large beast! Using a old measuring stick I'm 6'2" and the saw is 6'9", no wonder 

I had to use a small stepladder when working on the top wheel tensioner assembly which also facilities blade tracking.


at
Labels: , ,

2 comments:

  1. brianApril 8, 2015 at 5:01 AM

    this is the first long chance i have to view in detail your band saw project,, and your web page awsom , you are so busy its surprising you found time to visit your horse.. you are busy busy busy,,, amazing . each project is always a challenge.I know it keeps the gray matter young er good stuff ,,,, hope the motor is usefull and the connection details easy to obtain..... brian

    ReplyDelete
  2. AlanMApril 8, 2015 at 7:34 AM

    Thanks mate.

    ReplyDelete

Subscribe to: Post Comments (Atom)

Another new toy for kitties.

 

  • Wi-Fi Chicken Door - Part 3
    With the Wi-Fi Valve setup and operating we can start making the door frame and the actual door that will slide up and down inside a frame. ...
  • Wi-Fi Chicken Feeder - Part 1
    Suitable for use in the chook run where there is 240V power for the 12V power supply or powered from 12V SLA battery (also solar panel) for ...
  • 14" Bandsaw project – Motor mount
    To reiterate gave up with the hinged motor mount and went for a similar setup like the 8" bandsaw, simply sit the motor base on the flo...