Chooks coop heater - some modifications.

Due to some very cold nights I've been swapping between the regular 75W ceramic heat emitter and the larger 250W one. Currently that's a PIA cos I have to take out 2 screws to remove the top cover - time to fix that.

To change the heat emitter (lamp) I have to remove two screws and take off the top.

Annual council collection - finished

That's it for this years council collection, the last truck (green one) has cleared my three big stacks of green one of which was on my neighbours side.

Left a real mess out onto the road which is all cleaned up now including trimming and mowing.

Scroll saw project - update 14

The scroll saw is complete!

I'll use it for a while and see how it preforms. There will likely be refinements and I'll post the updates., here are two parting pictures.

Scroll saw project - update 13

The blade (cutting area) is quite close to the front of the table so I decided to make a fold down extension table.

The table extension is from Laminate flooring.

Scroll saw project - Update 12

For this session we are going to make the blade insert disc.

This is where we finished the last session, ready to route out the blade insert.

Android TV

Back on the balcony posting some pictures of the scroll saw build and, keeping a eye on the Blues vs Doggies game - free AFL footy.

Scroll saw project - Update 11

With the garden work done for council collection we are clear to potter in the workshop. Bloody cold miserable day but the gas heater has raised the temp in the shop from 7° to 12° plus, with some assistance from the Tangi heater.

Doing some electrical wiring, the jigsaw plugs into the surface socket.