Made the back frame and sprayed it black so here we can assemble the the back with the internal frame with the photo print sandwiched between the two. Also mounted the camera.
Aligned the photo print and punched through the screw holes with a nail.
Trim off the paper.
Locate and drill the wire holes.
Ready to glue down the camera we apply glue to the stand-offs. This part is always tricky as I flip over the work piece so protecting the background print with paper from stray glue drops.
For this sort of stuff now using Tarzan's Grip which tends not to drip like regular PVA glue.
With the camera done and left to dry come back and do the same again for the film reel to finish this stage - leave to dry.
No comments:
Post a Comment