We have a pot plant squatter :
Dropdown Menu
- My Home
- Pets
- Workshop 1
- Workshop 2
- Al's Workshop
- Projects 1
- Projects 2
- Technology
- Hobby
- My Diary
Monday, April 3, 2023
Sunday, April 2, 2023
Kodak Negative Scanner - Part 8 Demo Video
Finishing this session with a short demo video.
Getting tired so it's pretty crude, will follow-up with a better one.
Saturday, April 1, 2023
Kodak Negative Scanner - Part 8
From the last session we are going to cut a piece of clear plastic that will be glued onto the back of the carrier to support the negative.. We can the do some test scanning!
With the clear plastic cut and glued to the bottom of the negative carrier we can put aside with some weight on top.
Friday, March 31, 2023
Thursday, March 30, 2023
Wednesday, March 29, 2023
Kodak Negative Scanner - Part 6
Another day and back again to have another go at cutting another piece of Acrylic.
Yay... a nice clean, clear and unmarked piece of 'Acrylic glass' that will sit on top of the negative to stop it curling. This time I trimmed off two edges of the sheet to get away from where air and moisture had penetrated the edges drying out the adhesive backing. Same again hair dryer and where needed Tree Tree Oil. This time for the final clean I used a microfibre cloth!
Subscribe to:
Posts (Atom)
-
With the Wi-Fi Valve setup and operating we can start making the door frame and the actual door that will slide up and down inside a frame. ...
-
Suitable for use in the chook run where there is 240V power for the 12V power supply or powered from 12V SLA battery (also solar panel) for ...