Kodak Negative Scanner - Part 8

From the last session we are going to cut  a piece of clear plastic that will be glued onto the back of the carrier to support the negative.. We can the do some test scanning!

With the clear plastic cut and glued to the bottom of the negative carrier we can put aside with some weight on top.

Bailey on mum's lap for TLC

 

Kodak Negative Scanner - Part 7

 Working on the top phone panel.

Cutting some plywood strips for the edges of top phone panel.

Zia & Bailey - Hibernation

 

Kitties coming out of hibernation.

Kodak Negative Scanner - Part 6

 Another day and back again to have another go at cutting another piece of Acrylic.

Yay... a nice clean, clear and unmarked piece of 'Acrylic glass' that will sit on top of the negative to stop it curling. This time I trimmed off two edges of the sheet to get away from where air and moisture had penetrated the edges drying out the adhesive backing. Same again hair dryer and where needed Tree Tree Oil. This time for the final clean I used a microfibre cloth!

Kodak Negative Scanner - Part 5

 Making the sliding carrier holder that will contain the actual negative.

Measure, mark. and drill the corner holes for the scroll saw blade.

Garden Sentry 12V-16

We still have leaks and the penny just dropped!

This is a flashback photo to show how the solenoid is not sitting flush on the timber. I was aware of that - she'll be OK.