Workshop ceiling fan - Part 6 Final

In order to screw on the back plate I need to work out a way to hold the nuts and spring washers in the block mounting holes.

With the screws nipped up to the nuts I'm dabbing hot glue in there trying not to get any on the screw threads.

Workshop ceiling fan - Part 5

From the last session sprayed the MDF plate gloss white and while that was drying started hanging the LED Fluro lights over the workbench.


While this is drying we can start hanging the lights.

Workshop ceiling fan - Part 4

The fan is up and now we are wiring the controller.

Nice to see it up there!

Workshop ceiling fan - Part 3

 From the last session I began this one by separating the fan from the base assembly

\

Up the ladder with the base assembly (timber mounting plate + fan mounting base) and here I've put in two hex metal screws and about to remove the clamps to secure the other two corners.

Workshop ceiling fan - Part 2

Starting the fan install after posting that unboxing video clip.

Collecting what I need, this little roll of three core cable will do nicely between fan and controller. I got this when Masters was closing down, sitting all by itself on a barren shelf with a price tag of 50 cents. I knew it would come in handy one day.

Al's Workshop updates

Batman is ready to fly away.
Rough Collie with remote control off to new home.
Hot Wheels sign is next up.

Hot weather slowed things down a bit with 40 plus temps in the workshop (down tools) but we are rolling again.

At Bunnings today bought a Arlec ceiling fan which I will install tomorrow.

Workshop ceiling fan - Part 1

I purchased this Arlec 120cm 4 Blade White Ceiling Fan (CSF122W) for the workshop. Cost was $44 so happy with that!