Ballerina wall feature - Part 8

We are using a 12V 5M LED strip which I am cutting at the most convenient 12V supply cut point to turn corners and the bridging with hook-up wire.

Ballerina wall feature - Part 7

Here we are just glued and tacked the moulding to the inside edge of the frame.

I placed the ballerina in there to get an idea of how she'll look - that's good.

Ballerina wall feature - Part 6

Fortunately the weather look nice today so out this morning while the sun is out to spray paint the bnallerina.

Ballerina wall feature - Part 5

For this session we are back on the picture frame to fix picture moulding around the inside edge of the dressed pine timber.

Ballerina wall feature - Part 4

Finally we can start cutting out the ballerina.

Sanyo projector system - part 2

From the last session we are going to glue, clamp and screw the box together.

Ballerina wall feature - Part 3

In the last session we made the 1200 x 700mm picture frame and with lots of clamps around the edges left it to dry.

I mentioned that I was trying to figure out a way to transfer the ballerina cutting template to a large sheet of 3mm MDF sheet. I tried with my 3M (overhead projector) but that didn't work out.

Next up is to have a go with the Sanyo short throw projector but I don't have a screen.