Picking up from the clean-up along the side and turning the corner we need to remove that illegal timber gate that somehow became part of the spa fencing.
Dropdown Menu
- My Home
- Pets
- Workshop 1
- Workshop 2
- Al's Workshop
Friday, December 4, 2015
Pitfield makeover 4
After cleaning up the side of the house we now move around to the back to continue the ‘demolition’ work.
Picking up from the clean-up along the side and turning the corner we need to remove that illegal timber gate that somehow became part of the spa fencing.
Picking up from the clean-up along the side and turning the corner we need to remove that illegal timber gate that somehow became part of the spa fencing.
Thursday, December 3, 2015
Pitfield makeover 3
Moving on from the gate repair next job is to clean up this side of the house that has beams between the house and the fence with shade mesh on top.

Remove all the rotten beams that sloped down from the fascia to the top of the fence along with the shade mesh and drill out the joist hangers that were pop riveted to the fascia.
Remove all the rotten beams that sloped down from the fascia to the top of the fence along with the shade mesh and drill out the joist hangers that were pop riveted to the fascia.
Wednesday, December 2, 2015
Pitfield property makeover 1
Tuesday, November 24, 2015
Monday, November 23, 2015
Chook annex rebuild - Part 11 Final
Ridge capping to complete
Dropped into Bunnings on the way back from Waverley Gardens to buy some ridge capping for the annex. Need a 3 metre length but the only had 2.4’s so ended up buying 2 @ $34.43 each.
Sunday, November 22, 2015
Chook annex rebuild – Part 10
Wire barrier skirt - Finishing
Weather didn't look to good this morning and surprised it cleared as well as it did so back out to finish stapling the wire skirt to the base timbers so we can screw on the plinth boards. The final bit for this phase of the job is to back-fill and level the soil - all of a sudden the site looks neat and tidy.
Finished along the back, Speckles and Misty are inspecting the job.
Subscribe to:
Comments (Atom)
-
With the Wi-Fi Valve setup and operating we can start making the door frame and the actual door that will slide up and down inside a frame. ...
-
To reiterate gave up with the hinged motor mount and went for a similar setup like the 8" bandsaw, simply sit the motor base on the flo...
-
Early start this morning (for us retirees) to get to ALDI before opening time so we don’t miss out on the sewing machine and table. We were ...



