American Staffordshire Terrier
Over the last week with the cold weather have not spent any time out in the workshop and then Holly needed extra care culminating with her leaving us - forever!
Today was another busy day catching up with away-from-home stuff but did manage to get out to the work shop after we got home from shopping.
Picking up from the last Part 2 session here is the internal spacer frame sitting inside the actual 6 x 4 picture frame.
The picture frame back will sit on the internal frame and be secured with tiny wood screws.
From the last session 6 x 4 glossy photo paper was glued onto the front of the picture frame back with Glue Stick.
I carefully positioned the doggie and then poked under with a pencil to mark the position to drill a hole for the rice LED wires. I then put glue on the two standoffs', turned over face up and while positioning lowered the doggie onto the back - apply pressure.
Sitting inside the picture frame.
For the final session we will mount and wire the battery box.
No comments:
Post a Comment