Just finished cutting the outline on the 8” band saw and then the scroll saw.
Before cutting out the name let’s prepare the MDF 10mm middle layer that will support the LED strip. Transfer the outline to the MDF blank and draw another outline 10mm in from the original – put aside.
As usual drill the pilot holes in the letter segments for cutting out on the scroll saw. For each segment the blade of course needs to be and passed through one of the holes.
Ready to spray paint.
While that’s drying we can continue with the middle layer.
I start with the 8” band saw; cut what I can then move over to the scroll saw.
With the name cut out done we can move on – what’s next?
No comments:
Post a Comment