Golden Retriever night light - Part 1

As mentioned in a previous post rather the building the frame for this Goldie night light I'm going to use a regular picture frame.

I was after a A4 wood box frame but had to settle for this, pretty close see last picture.

This will be interesting, how will the glass work out?

A4 page sitting on top of this particular frame which is not quite A4.

keep looking for one.

Samoyed night light - part 10b

Instructions

Samoyed night light - Part 10A

The Samoyed night is completed.

This morning screwed the stand onto the frame.

Silhouette night lights - some ideas.

Why not use a store bought frame ?



Rather than making my own base board for these projects why not buy some picture frames! A4 wooden ones cost around $10 bucks.

Samoyed night light - part 9

Hot glued the LED's and stained the stand.

A dab of glue on the four standoff's will fix the doggie to the base board.

Samoyed night light - part 8

Made a base and provision to wall hang.

Found a bit of plywood the right so cleaned it up on disc & belt sander. Here I measured and marked so the frame is centered on the stand and used some scrap wood with clamps to fix the location so I can turn it over to put in the screws.

Samoyed night light - part 7 mock-up video

The controller is set to Dusk mode, only works at night (semi-dark to dark) and turns ON when the front mounted PIR (sensor) is triggered by movement.

There is also a Day mode where you manually turn ON/OFF - anytime.